|
|
Part Number |
Kg. Capacity |
Ball Ø |
A |
B |
C |
D |
|
Plain fitting
|
MP 10 MP 12 MP 15 MP 22 MP 30 MP 45 MP 60 MP 76 MP 90 |
20 20 40 120 250 500 1000 2500 3500 |
12.0 12.7 15.9 22.2 32.2 44.5 60.0 76.0 90.0 |
20.0 24.0 25.0 36.0 45.0 62.0 100.0 130.0 145.0 |
20.0 20.7 21.0 30.5 36.8 53.5 77.5 103.0 115.0 |
16.0 17.2 16.0 27.9 30.3 45.0 61.0 80.0 90.0 |
4.0 3.5 5.0 2.6 6.5 8.5 16.5 23.0 25.0 |
|
|
Part Number |
Kg. Capacity |
Ball Ø |
A |
B |
C |
D |
E |
|
Push Fit
|
M 15 M 22 M 30 M 45 M 60 |
40 120 250 500 1000 |
15.9 22.2 30.2 44.5 60.0 |
24.0 36.0 45.0 62.0 100.0 |
21.0 30.5 36.8 53.5 77.5 |
9.5 9.8 13.8 19.0 29.5 |
11.5 20.7 23.0 34.5 48.0 |
31.0 45.0 55.0 75.0 117.0 |
|
|
Part Number |
Kg. Capacity |
Ball Ø |
A |
B |
C |
D |
E |
|
Washdown Unit
|
MW 30 |
215 |
30.1 |
45.0 |
16.8 |
23.0 |
55 |
41 |
This "
metric" 'Washdown' unit features a 'multi-hole' drainage system which allows fluids and debris to quickly drain through the 5 large fluid drain holes formed in the base of the hemispherical cup. All Balls and a special support cup are made from stainless steel. Outer body is Zinc coated steel. To allow unimpeded drainage the felt seal is omitted in this range.
| Copyright 2004 Moore International Ltd | Unit 12, Cortry Close, Poole, Dorset BH12 4BQ Tel. 01202 743222 Fax 01202 739955 Email Us |
