Gasketing

Product	5203	5205	5208	5900
Gasket Type	Formed-In-Place
Flange Type	Rigid			Flexible
Cure Method	Anaerobic			Moisture
Handling Strength*	15 min.	40 min.	20 min.	2-4 hours
Tack-Free Time	N.A.			5 min.
Temperature Resistance	150°c			200°c
Instant Seal	Excellent
Oil Resistance	Excellent
Water/Glycol Resistance	Moderate	Good	Moderate	Moderate
Colour	Red			Black
Pack Sizes
250ml tube
300ml cartridge

* = At room tempertaure on steel joints

Loctite 5203

Recommended for coating and re-using metal gaskets to improve sealing and also to hold in place during assembly. Low strength for easy disasembly.

Loctite 5205 (Replaces Loctite 518)

Recommended for aluminium parts where flexibility is required e.g. aluminium gear box and engine castings, etc.

Loctite 5208 (Replaces Loctite 574)

Recommended for use on rigid metal parts e.g. cast iron componants and pump housings, etc.

Loctite 5900

Replacement for conventional cork and paper cut gasket on: compressors, gearboxes, oil pans, stamped sheet metal covers, construction equipment, mining equipment and industrial machinery. Recommended to be used where high vibratin or flexing occurs. Can also be used with plastic parts.

Home Ball Screws/BallScrew Repair Lead Screws Complimentary Products Anti Vibration Mounts Bearings & Housings Circlips White Metal Bearings Rod Ends Ball Joints Machine Feet Couplings Grease Nipples and Grease Guns Chains and Sprockets BT Lock Bush Taper Bushes Sintered Bronze Bushes Needle Rollers Seals Disc Springs Ball Transfer Units O-Rings Loctite Retaining Instant Bonding Structural Bonding Sealing Activators and Primers Loctite Sticks Loctite Metal Set Threadlocking Thread Sealing Gasketing V-Rings Vee & Wedge Belts Pulleys Ball Screw Support Units Acme/Trappezoidal Job Vacancies About Us Information

Copyright 2004 Moore International Ltd

Unit 12, Cortry Close,  Poole, Dorset BH12 4BQ Tel. 01202 743222 Fax 01202 739955  Email Us