|
Product |
222 |
243 |
290 |
2701 |
|
Size Thread |
Up to M 36 |
Up to M12 |
Up to M 20 | |
|
Strength |
Low |
Medium |
Medium/High |
High |
|
Functional Strength (Hours)* |
6 |
2 |
3 |
6 |
|
Breakaway Torque M10 bolts (Nm) |
6 |
20 |
10 |
36 |
|
Long-term temp. resistance |
+150°c | |||
|
Pack Sizes: |
| |||
|
10ml |
|
|
|
|
|
50ml |
|
|
|
|
|
250ml |
|
|
|
|
* = Typical value at 22°c
Recommended for low-strengthlocking of parts and non-ferrous metals (e.g. aluminium, brass and other copper based alloys, which could break on disassembly). Also for locking adjusting screws, counter-sunk head screws and set screws; on collars, pulleys, tools holders and controllers.
Effective on all types of metal threaded fasteners (including black oxide coated steel and brass-fasteners). Prevents loosening on vibrating parts such as pumps or motor mounting bolts, engine rocker nuts, equipment housing screws, gear boxes or presses. Recommended for use where disassembly with hand tools is required for servicing and where parts are 'as received'.
Pre-assembled fasteners, instrumental screws, electrical connectors, carburettors and set screws.
For use on metal fasteners (including passive materials such as stainless steels and fasteners with passive conversion coatings such as zinc), where removal for maintenance is not required. Also recommended for permanently locking studs on engine blocks and pump housings.
| Copyright 2004 Moore International Ltd | Unit 12, Cortry Close, Poole, Dorset BH12 4BQ Tel. 01202 743222 Fax 01202 739955 Email Us |
