Mount Section

The tables below show nominal static values for 55 shore compounds.

For other hardness's the following factors should be applied:

45 shore = 55 shore value x 0.55
70 shore = 55 shore value x 1.75

SELECTION PROCEDURE:

1. Determine the maximum load for each support location.
2. Choose a mount with a load capacity between one and two times the values determined in (1).
3. Select the most suitable mount, bearing in mind - space available, direction of loading, and required vibration isolation levels.

Home Christmas Opening Times Ball Screws/BallScrew Repair Lead Screws Complimentary Products Anti Vibration Mounts Buffers Circular Buffers Cone Buffers Plate Buffers Circular Mounts Mount Section Moore Stop Mounts Stainless Steel Anti Vibration Mounts VS2000 Series Mount Bearings & Housings Circlips White Metal Bearings Rod Ends Ball Joints Machine Feet Couplings Grease Nipples and Grease Guns Chains and Sprockets BT Lock Bush Taper Bushes Sintered Bronze Bushes Needle Rollers Seals Disc Springs Ball Transfer Units O-Rings Loctite V-Rings Vee & Wedge Belts Pulleys Ball Screw Support Units Acme/Trappezoidal Job Vacancies About Us Information

Copyright 2004 Moore International Ltd

Unit 12, Cortry Close,  Poole, Dorset BH12 4BQ Tel. 01202 743222 Fax 01202 739955  Email Us