Needle Rollers

Moore International supplies all types of rollers, for use in a wide variety of applications. The three main types of roller are as follows -

• Needle Rollers - With either rounded or square ends,
• Cylindrical Rollers - With either ground or ungrounded ends,
• Cylindrical Spindles - With controlled counter profile (crowned).

The standard materials used in the manufacture of rollers is chrome steel. Depending on quantity, Moore International can supply rollers amde in Carbon Steel C72, Tool Steel S2, Stainless Steel AISI 420, AISI 302 and AISI 316.

WEIGHT PER 1000 PIECES IN GRAMS
Lwh13 (mm)
Dw (mm)	5.8	6.8	7.8	9.8	11.8	13.8	15.8	17.8	19.8	21.8	23.8	27.8	29.8	34.8	39.8	49.8
1.5	80	94	108	136	164	191	214	-	280	-	-	-	-	-	-	-
2	-	-	190	240	290	340	390	440	490	530	595	-	-	-	-	-
2.5	-	-	300	380	450	530	610	690	760	840	920	-	-	-	-	-
3	-	-	430	540	650	760	870	990	1100	1210	1320	1540	1650	-	2150	-
3.5	-	-	-	760	910	1050	1190	1350	1510	1670	1850	2100	2250	2650	2900	-
4	-	-	-	960	1150	1350	1550	1750	1950	2140	2330	2620	2950	3400	3900	-
5	-	-	-	-	-	2110	2430	2740	3050	3340	3670	4180	4600	5400	6150	7500

 

Home Ball Screws/BallScrew Repair Lead Screws Complimentary Products Anti Vibration Mounts Bearings & Housings Circlips White Metal Bearings Rod Ends Ball Joints Machine Feet Couplings Grease Nipples and Grease Guns Chains and Sprockets BT Lock Bush Taper Bushes Sintered Bronze Bushes Needle Rollers Seals Disc Springs Ball Transfer Units O-Rings Loctite V-Rings Vee & Wedge Belts Pulleys Motor Mounts Three Phase Stainless Steel Motors Ball Screw Support Units Acme/Trappezoidal Job Vacancies About Us Information

Copyright 2004 Moore International Ltd

Unit 12, Cortry Close,  Poole, Dorset BH12 4BQ Tel. 01202 743222 Fax 01202 739955  Email Us