Standard Motor Mounts

Specification
Produced in three sizes for motors from frame size 63 to 225 and manufactured from pressed steel fabrications with four slotted holes for fastening the base to the foundation.

Alignment
The pressed top plate is designed to slide exactly over the mounting rails preventing vibration and noise whilst ensuring continuous belt alignment. Belts are tensioned by adjusting a single screw, which is possible whilst the motor is running.

Surface Finish
Stove enamelled finish with zinc plated adjustment screws to prevent corrosion.

Motor Mounting
The top plate requires drilling to accommodate the required motor mounting bolts. Centre distance adjustments can be made without the need to loosen the motor bolts.

Home

Ball Screws/BallScrew Repair

Lead Screws

Complimentary Products

Anti Vibration Mounts

Bearings & Housings

Circlips

White Metal Bearings

Rod Ends

Ball Joints

Machine Feet

Couplings

Grease Nipples and Grease Guns

Chains and Sprockets

BT Lock Bush

Taper Bushes

Sintered Bronze Bushes

Needle Rollers

Seals

Disc Springs

Ball Transfer Units

O-Rings

Loctite

V-Rings

Vee & Wedge Belts

Pulleys

Motor Mounts

Rapid Fit Motor Mounts

Standard Motor Mounts

Slide Rails

Three Phase Stainless Steel Motors

Ball Screw Support Units

Acme/Trappezoidal

Job Vacancies

About Us

Information

Copyright 2004 Moore International Ltd Unit 12, Cortry Close, Poole, Dorset BH12 4BQ Tel. 01202 743222 Fax 01202 739955 Email Us